7 Most Common Questions Regarding Sewing Machines

7 Most Common Questions Regarding Sewing Machines


Peruse the Expert Answers for the most Common Sewing Machine Questions

Sewing machines are complicated objects with intricate parts that require technical support and maintenance for a productive function. If you are a sewing machine owner, it is important that you understand those intricate parts and the complexities that may hinder your work progress. Here are the answers to most commonly asked questions about sewing machines to help you make your work more productive and elongate the life of your machine for years to come. The answers can you learn about the most common machine symptoms that may cause damage to the parts. Read below.

1.       What is causing the thread to bunch up?
Thread bunch up is a common sewing machine dysfunction that can be easily resolved. It is usually caused by incorrect thread set up in both upper and lower tensions. To resolve this problem, draw all the thread under the foot pressure before proceeding to sew. In addition, make sure to clean your machine regularly to avoid build up along the shuttle race and thread path.

2.       My sewing machine needle doesn't move. What should I do?
Some sewing machines Dubai have a manual wheel clutch that usually disengages the needle during bobbin winding. However, the needle may not move if the drive belt is broken. In that case get you machined inspected by a professional technician.

3.       My sewing machine won't pick up the bobbin thread? What should I do?
This problem could be caused by incorrect needle installation. Make sure to install the needle in a far up position (as far as it can go) with its flat side facing backward. In addition, install the bobbin correctly according to manufacturer's guidelines and draw the bobbin thread up before using the machine.

4.       How do I maintain my sewing machine's timing?
The timing is usually adjusted by a service technician. The technicians have special adjustment tools to adjust the machine timing for immaculate precision. You can adjust it by yourself by positioning your needle in alignment with the shuttle drive gear for a smooth synchronization of the shuttle hook and the needle.

5.       How do I prevent the needle from breaking?
Always check the needle for proper installation before sewing. In addition, make sure that the needle does not go too deep in the bobbin case during sewing; it can easily break the needle. Moreover try not to pull the fabric during sewing as it can break the needle as well.

6.       When is the right time to change sewing machine needle?
As a rule of thumb, you should change your sewing machine needle when you start a new project. In addition, inspect the needle and if it shows any signs of damage, replace it with a new one.

7.       How often oiling is required for proper maintenance?
Most sewing machines come pre-lubricated from the factory and do not require oiling. However, if your machine isn't pre-lubricated, you can follow owner's manual for oiling directions. If you don't sew too often, only oil the machine once in every 3 months. Similarly, if you are going to put away your sewing machine for a long period, oil it thoroughly before storing it.
Sewing machine’s proper maintenance is the key to its productive function and longevity. If you have any more questions regarding maintenance or usage of your sewing machine, make sure to ask your supplier or the machine manufacturer before using it.

Comments